	BY MACHINE FAMILY	BY JOB	BY KEYWORD

By carrier : Excavators

Result(s) : 44

360° pulverizer

The One-TP rotating pulverizer is designed for maximum efficiency in your secondary demolition and recycling works.

Block bucket for excavator

Tool suitable for displacing blocks, very hard soils and where a remarkable resistance to wear is required. It is supplied with the best components...

Compacting plate

Compacting the ground after any kind of excavation for use in difficult and narrow loacations, such as the base of pipeline trenches.

Coupling

For augers, hydraulic grabs. Built on demand.

Crushing bucket for excavator

Best solution for small and medium sized work sites.

Demolition arm for excavator

2 types : fixed and mechanical. Demolition arms improve the ability of the excavator to pull down old buildings.

Ditch cleaning bucket

Very wide bucket, suitable for levelling and cleaning works, specially designed for ditches and banks, without stones or hard materials.

Grapple

A large range of grabs is available for 6 to 80 ton machines with build specifications suitable for anything handling to demolition and waste handling

Grid bucket for excavator

Tool suitable for initial material selection. Grid section depends on the size of the material to be selected. It is supplied with the best compon

Groundforce bucket for excavator

Heavy duty steel fabricated buckets for 360° excavators.

Heavy duty excavator bucket

Heavy duty steel fabricated buckets for 360° excavators

Hydraulic cutting unit TD100N - 16 to 26 tonnes

40 years experience in mining and construction industries, developed first reliable gearbox design, released new improved hydraulic cutting unit range

Hydraulic cutting unit TD140 - 25 to 38 tonnes

40 years experience in mining and construction industries, developed first reliable gearbox design, released new improved hydraulic cutting unit range

Hydraulic cutting unit TD250 - 40 to 60 tonnes

40 years experience in mining and construction industries, developed first reliable gearbox design, released new improved hydraulic cutting unit range

Hydraulic cutting unit TD40 - 7 to 15 tonnes

40 years experience in mining and construction industries, developed first reliable gearbox design, released new improved hydraulic cutting unit range

Hydraulic cutting unit TD50 - 12 to 18 tonnes

40 years experience in mining and construction industries, developed first reliable gearbox design, released new improved hydraulic cutting unit range

Hydraulic ejector bucket for excavator

Small buckets under 400 mm width are made regularly. Sticky material like clay or top soil are processed with the use of a throw bucket with hydraulic

Mechanical concrete crusher

These are manufactured with a heavy duty tubular design, for maximum stabilisation during the pulverizing cycle.

Multi-grab bucket

The patented Multi-grab bucket is a bucket, which combines two functions : digging and grabbing.

Multiprocessor

One-TP multiprocessor is a optimized tool for toughest primary and secondary demolition operations.

Multipurpose front bucket

Can replace original equipment increasing machine versatility.

Multipurpose grab

The Multi-Purpose grab was designed for use in selective demolition sites where sorting of recyclable material and loading of various material is requ

One-TP ripper bucket

The One-TP ripper bucket is a high quality product from our company that is made of high class materials and years of experience.

One-TP stump shears for excavator

Three teeth do the wood crushing, regardless of stump diameter. Productivity is better when stumps are dry.

One-TP thumbs

One-TP bucket thumbs are matched to hydraulic excavator buckets for increased on-the-job performance.

Pallets forks for excavator

The Pallet Forks give your excavator all the material handling capability of a teleporter, without the capital cost.

Power plates

Plates for the protection of surfaces and for the creation of temporary access roads.

Pulverizer

Improved One-TP fixed pulverizer with trunnion-supported cylinder gives you high breaking forces throughout the entire working cycle...

Riddling bucket

The riddling bucket works with the same hydraulic system of the rockbreaker or the grab and it is designed to be fitted on diggers from 2,5 to 40 tons

Ripper tooth

For use in hard rock or concrete when use of hydraulic hammer or blasting is not possible or too expensive.

Rock breaker cradle

ONE TP rock breaker tops are made on demand to follow excavator and attachment requirements.

Roto One

The Roto One is a swidel drive, which allows working tools, mounted on excavators and forest equipment, to rotate in every direction...

Screening bucket

One-TP screening technology is designed for ease of maintenance and low cost over the life of the product.

Stabilizer blade for excavator

This type of equipment allows an increase of the stability and functionality of the excavator.

Standard and extralong sticks for excavator

Makes digging unit more versatile. Basic specifications of the machine remain unchanged.

Stump grinder

Suitable for different machines, it allows the operator to work in full safety.

Telescopic lifting boom for excavator

The telescopic boom transforms your excavator into an adaptable crane increasing the out-reach of the excavator up to 4.5m.

Tilt motor

Tilt motor for use with any commercially available quick coupler.

Tilt rotator

The Tilt Rotator is a multifonctional adapter between the spoon-handle of the excavator and the bucket.

Tiltable ditch cleaning bucket

Very wide bucket, suitable for levelling and cleaning works, especially ditches and banks, when stones and hard materials are absent.

Universal hydraulic quick hitch

Universal hydraulic quick hitch has six main safety features.

Variable angle V shape bucket (hydraulic)

Compared with conventional ditch cleaning bucket, use of the trapezoidal ditching bucket enables an increase efficiency to be realized...

Variable angle V shape bucket (mechanical)

The One-TP variable V-shape bucket can be adjusted to 3 different angles: 45-56-64°.

Verachtert type quick hitch

This system can be used to convert hydraulic excavators into universally applicable carrier machines.

One-TP

1 Place du 8 Mai 1945

60119 Neuville Bosc - FRANCE

Phone : +33 1 30 37 06 26

Fax : +33 1 34 40 01 44

Email : sales |at| one-tp.com

Web : www.one-tp.com

separation

Open 8AM - 7PM
Monday to Friday.

separation

We can collect you from Beauvais
or Charles-De-Gaulle Airports.

separation

call us !

Copyright 2008 - one-tp.com | New attachments for building machinery | Contact| Map | Legal notices | Web site created by : GenesID

Products : Crawler and wheel excavators, Mini-excavators, Front loaders, Loader backhoes for Earth moving, Demolition, Trenching, utility networks, Individual construction and Quarry
Ammann-yanmar | Caterpillar | Daewoo | Doosan | Hanix | Hitachi | Hyundai | Imer | JCB | Kobelco | Komatsu | Kubota | Liebherr | Neuson | New Holland | Takeuchi | Terex | Volvo