	BY MACHINE FAMILY	BY JOB	BY KEYWORD

By job : Trenching, utility networks

Result(s) : 43

Auger

One-TP's new generation premium drive range for the ultimate in performance, quality and cost effectiveness.

Cobra Combi

Atlas Copco Cobra Combi is the most powerfull hand Rock Breaker available on the market.

Compacting plate

Compacting the ground after any kind of excavation for use in difficult and narrow loacations, such as the base of pipeline trenches.

Coupling

For augers, hydraulic grabs. Built on demand.

Ditch cleaning bucket

Very wide bucket, suitable for levelling and cleaning works, specially designed for ditches and banks, without stones or hard materials.

Front loader bucket (light application)

Front loader bucket for light application (3-50 tonnes, 480 to 7200 liters).

Grid bucket for excavator

Tool suitable for initial material selection. Grid section depends on the size of the material to be selected. It is supplied with the best compon

Groundforce bucket for excavator

Heavy duty steel fabricated buckets for 360° excavators.

Heavy duty excavator bucket

Heavy duty steel fabricated buckets for 360° excavators

Hydraulic cutting unit RT15 - 1 to 2 tonnes

40 years experience in mining and construction industries, developed first reliable gearbox design, released new improved hydraulic cutting unit range

Hydraulic cutting unit TD100N - 16 to 26 tonnes

40 years experience in mining and construction industries, developed first reliable gearbox design, released new improved hydraulic cutting unit range

Hydraulic cutting unit TD140 - 25 to 38 tonnes

40 years experience in mining and construction industries, developed first reliable gearbox design, released new improved hydraulic cutting unit range

Hydraulic cutting unit TD250 - 40 to 60 tonnes

40 years experience in mining and construction industries, developed first reliable gearbox design, released new improved hydraulic cutting unit range

Hydraulic cutting unit TD30 - 2 to 6 tonnes

40 years experience in mining and construction industries, developed first reliable gearbox design, released new improved hydraulic cutting unit range

Hydraulic cutting unit TD40 - 7 to 15 tonnes

40 years experience in mining and construction industries, developed first reliable gearbox design, released new improved hydraulic cutting unit range

Hydraulic cutting unit TD50 - 12 to 18 tonnes

40 years experience in mining and construction industries, developed first reliable gearbox design, released new improved hydraulic cutting unit range

Hydraulic ejector bucket for excavator

Small buckets under 400 mm width are made regularly. Sticky material like clay or top soil are processed with the use of a throw bucket with hydraulic

Mechanical semi-automatic hitch

The mechanical semi-automatic hitch allows the excavator to work in loader applications without safety pin.

Mini-ex mechanical quick hitch

Mini range of quick hitch systems in both manual and hydraulic.

Multipurpose front bucket

Can replace original equipment increasing machine versatility.

One-TP ripper bucket

The One-TP ripper bucket is a high quality product from our company that is made of high class materials and years of experience.

One-TP stump shears for excavator

Three teeth do the wood crushing, regardless of stump diameter. Productivity is better when stumps are dry.

One-TP thumbs

One-TP bucket thumbs are matched to hydraulic excavator buckets for increased on-the-job performance.

Pallet forks for front loader

Pallet forks for your wheel loaders for handling pallets or other heavy products.

Pallets forks for excavator

The Pallet Forks give your excavator all the material handling capability of a teleporter, without the capital cost.

Power plates

Plates for the protection of surfaces and for the creation of temporary access roads.

Quick hitch for front loader

Both One-TP quick coupler systems for wheel loaders allow fast and simple replacement of attachments.

Riddling bucket

The riddling bucket works with the same hydraulic system of the rockbreaker or the grab and it is designed to be fitted on diggers from 2,5 to 40 tons

Ripper tooth

For use in hard rock or concrete when use of hydraulic hammer or blasting is not possible or too expensive.

Rock breaker cradle

ONE TP rock breaker tops are made on demand to follow excavator and attachment requirements.

Roto One

The Roto One is a swidel drive, which allows working tools, mounted on excavators and forest equipment, to rotate in every direction...

Screening bucket

One-TP screening technology is designed for ease of maintenance and low cost over the life of the product.

Side tipping shovel

Side tipping shovel for front loaders ranging from 3.5 to 9 tonnes. Capacities from 600 to 1300 liters. Ideal for filling trench bottoms.

Stabilizer blade for excavator

This type of equipment allows an increase of the stability and functionality of the excavator.

Stump grinder

Suitable for different machines, it allows the operator to work in full safety.

Telescopic lifting boom for excavator

The telescopic boom transforms your excavator into an adaptable crane increasing the out-reach of the excavator up to 4.5m.

Tilt motor

Tilt motor for use with any commercially available quick coupler.

Tilt rotator

The Tilt Rotator is a multifonctional adapter between the spoon-handle of the excavator and the bucket.

Tiltable ditch cleaning bucket

Very wide bucket, suitable for levelling and cleaning works, especially ditches and banks, when stones and hard materials are absent.

Universal hydraulic quick hitch

Universal hydraulic quick hitch has six main safety features.

Variable angle V shape bucket (hydraulic)

Compared with conventional ditch cleaning bucket, use of the trapezoidal ditching bucket enables an increase efficiency to be realized...

Variable angle V shape bucket (mechanical)

The One-TP variable V-shape bucket can be adjusted to 3 different angles: 45-56-64°.

Verachtert type quick hitch

This system can be used to convert hydraulic excavators into universally applicable carrier machines.

One-TP

1 Place du 8 Mai 1945

60119 Neuville Bosc - FRANCE

Phone : +33 1 30 37 06 26

Fax : +33 1 34 40 01 44

Email : sales |at| one-tp.com

Web : www.one-tp.com

separation

Open 8AM - 7PM
Monday to Friday.

separation

We can collect you from Beauvais
or Charles-De-Gaulle Airports.

separation

call us !

Copyright 2008 - one-tp.com | New attachments for building machinery | Contact| Map | Legal notices | Web site created by : GenesID

Products : Crawler and wheel excavators, Mini-excavators, Front loaders, Loader backhoes for Earth moving, Demolition, Trenching, utility networks, Individual construction and Quarry
Ammann-yanmar | Caterpillar | Daewoo | Doosan | Hanix | Hitachi | Hyundai | Imer | JCB | Kobelco | Komatsu | Kubota | Liebherr | Neuson | New Holland | Takeuchi | Terex | Volvo